Land Application of Livestock and Poultry Manure

Cecil Hammond, Retired Extension Engineer; Bill Segars, Extension Water Quality Specialist; & Charles Gould, Special Agent

Contents

1. Factors Affecting Fertilizer Value & Recommendations for Application
   
2. Determine How Much Manure Can Be Applied
   
3. Solids in Liquid Manure
   
4. Management Factors

Livestock and poultry manures contain nutrient elements that can support crop production and enhance the chemical and physical properties of soil. Manure can be an asset to livestock and poultry operations when its nutrients are used for fertilizer. This publication provides information on (1) the nutrient content of manures available for land application, (2) how to determine manure application rates and whether supplemental fertilizer will be needed for maximum crop production and (3) how to use management techniques to maximize the fertilization potential of farm manures.

Factors Affecting Fertilizer Value & Recommendations for Application

The type and amount of nutrients in livestock and poultry manures and the nutrients' eventual availability to plants may vary considerably. Some factors affecting nutrient value of applied manure are: type of ration fed; method of collection and storage; amount of feed, bedding and/or water added; time and method of application; soil characteristics; the crop to which the manure is applied; and climate.

Increasing levels of various elements (copper, arsenic, etc.) and inorganic salts (sodium, calcium, potassium, magnesium, etc.) in feed will increase their concentrations in manure. There is concern about the potential toxic effects to plants of high concentrations of heavy metals and salts in soil as a result of high application rates of manure to the land. Perform regular soil tests and manure analyses to monitor the balance of nutrients in the soil on your farm, especially on land receiving heavy manure applications. From an environmental standpoint, limit the rate of manure application to the needs of the crop grown on the land.

Bedding and water dilute the nutrient concentration of manure and reduce its value. On the other hand, feed spilled and incorporated into the manure increases the nutrient concentration. Excessive feed spillage and/or inadequate agitation may cause sludge buildup in liquid systems, making removal of the manure more difficult.

The type of housing and/or waste handling system you use greatly affects the nitrogen (N) concentration of manures (Table 1). Major N losses occur when manure is dried by sun and air movement or leached by rain, as is the case in open lot systems. In contrast, manure loses comparatively little N in a completely covered facility using a manure pack or liquid pit storage system. Loss of N is greatest in long-term treatment or storage systems such as oxidation ditches or lagoons.

Table 1. Approximate Nitrogen Losses from Manure as Affected by Handling & Storing
Handling Storing Methods	Nitrogen Loss*
Solid Systems:
Manure Pack	35%
Poultry Litter	35%
Liquid Systems:
Anaerobic Pit	25%
Oxidation Ditch	60%
Lagoon	80%
*Based on composition of manure applied to the land vs. composition of freshly excreted manure.

Phosphorus (P) and potassium (K) losses are minimal (5 to 15 percent) for all but open lot and lagoon manure handling systems. In an open lot, you can lose from 40 to 50 percent of the manure's P and K to runoff and leaching. However, most of the P and K can be retained for fertilizer use by runoff control systems (setting basins, detention ponds). In lagoon systems, from 50 to 80 percent of the P in manure can settle in the sludge layer and thus be unavailable if only the liquid portion is applied to the land.

Table 2. Approximate Nitrogen Losses from Manure to the Air as Affected by Application Method
Application Method	Type of Manure	Nitrogen Loss*
Broadcast without cultivation	Solid	20%
	Liquid	25%
Broadcast with cultivation**	Solid	5%
	Liquid	5%
Knifing	Liquid	5%
Irrigation	Liquid	30%
*Percent of total nitrogen in manure applied that was lost within 4 days after application.
**Cultivation immediately after application.

You will realize maximum nutrient benefit from manure if you incorporate it into the soil immediately after land application (Table 2). Incorporation minimizes N loss into the air and/or in runoff and also allows soil microorganisms to start decomposing the organic matter in the manure, thus making nutrients available to the plant sooner. In addition, incorporation of manures into the soil minimizes odor.

Generally, P and K losses are negligible and are not affected by the method of application; however, incorporating manure minimizes P and K losses due to surface runoff. Apply manure as uniformly as possible to prevent local concentrations of ammonium-N or other inorganic salts that can reduce seed germination and crop yields.

By applying manure just before the planting date of crops, you maximize plant nutrient availability, especially in high rainfall areas and on porous soils having rapid percolation. However, don't plant immediately after heavy manure application. Salt accumulation near the soil surface and/or a temporary excess of ammonia resulting from the breakdown of organic nitrogen lower germination and reduce seedling growth. As an alternative, late fall applications may be desirable because of labor availability, field conditions, etc. Even though fall applications may result in 5 to 10 percent total N loss, the extra time allows soil microorganisms to more fully decompose the manure and release its nutrients for use during the following cropping season. This is especially advantageous for solid manure which contains much organic matter.

For sandy or coarse-textured soils, manures can best be applied frequently and at low rates throughout the growing season to provide environmental protection and maximum plant growth. Soils with more than 10 percent slope should not have manure applied or if applied, use injection of liquid manure into sod.

Not all manure nutrients are readily available to a crop in the year of application. To be utilized by plants, nutrients in manure must be released from the organic matter in a water-soluble form. Manure nitrogen is in ammonium (inorganic) and organic forms. Potentially, plants could use all of the ammonium-N in the year of application. Nitrogen in the organic form, however, must be "released" before plants can use it. In other words, the organic nitrogen must be converted to ammonium (NH₄)+ or nitrate (NO₃) -- before it can be utilized by plants. Approximately 75 percent of the total N will be available to crops during the year of application with the remainder carried over and available the next cropping season.

However, the rate of availability of N is largely influenced by soil, climate, etc. In contrast, nearly all the P and K in manures are available for plant use during the year of application.

Table 3 shows the pounds of nutrients excreted annually by various livestock per 1,000 pounds live-weight. The nutrient content of manure from your farm might differ considerably from the values presented here. These figures can, however, serve as a guideline for planning purposes. Nutrient analysis of the manure is highly desirable.

Determine How Much Manure Can Be Applied

You can only determine the exact amount of nutrients available for land application from your operation by laboratory analysis. But you can use Tables 1, 2, and 3 Calculate the approximate nutrient value of your manure from Table 3, then subtract storage and handling losses (Table 1) and application losses (Table 2) to get the nutrients available at time of application. With these figures you can estimate the amount of manure to apply to a given crop area and whether your crop will require additional commercial fertilizer. In addition, if you know the quantity of nutrients available from your operation per year, you can determine how much land is needed for manure disposal. Table 4 gives nutrient needs for various crops. Apply to the land at such a rate that the amount of available nutrients does not greatly exceed the amount removed by the growing crop.

Example

Step 1. Determine the nutrient needs of the crop. From Table 4, for 150 bushels of corn: N = 225 pounds/acre, P₂ O₅ = 80 pounds/acre, K₂O = 215 pounds/acre.

Step 2. Determine the nutrient value of manure from Table 3. Pounds nutrient/year/animal unit in manure as excreted: N = 164, P₂O₅ = 124, K₂O = 132. Nitrogen value should be reduced 80 percent for storage losses (Table 1) and 30 percent for application loss (Table 2). This means only 23 pounds of N/1,000 pound animal unit are available for crop utilization. At 125 pounds/head the number of 1,000 pound animal units = 1,000 head x 125 pounds/head = 125 animal units.

1,000 pounds/animal unit

To determine the total pounds of each nutrient available, multiply unit values by the number of animal units:

N= 23 x 125 = 2,875 pounds

P₂O₅ = 62 x 125 = 7,750 pounds*

K₂O = 66 x 125 = 8,250 pounds*

*Assumes 50 percent recovery with little or no agitation of the lagoon.

Step 3. Determine number of acres required for maximum nutrient utilization. Divide total pounds of each nutrient (from Step 2) by pounds of that nutrient required per acre (from Step 1).

Acres Required for N = 2,875 ÷ 225 = 12.8

Acres Required for P₂O₅ = 7,750 ÷ 80 = 96.8

Acres Required for K₂O = 8,250 ÷ 215 = 38.4

Thus P₂O₅ is the acreage-determining nutrient if nutrients are fully utilized. Manure should be applied over 96.8 acres to assure maximum utilization of the manure (in actual practice, P and K are often over applied to allow more nitrogen application). Make up the remaining N and K₂O required for production with commercial fertilizer.

Step 4. Determine supplemental fertilizer needed (total needs - supplied). Since manure will be applied over 96.8 acres, the following total amounts of N, P₂O₅, and K₂O will be required:

N = 96.8 x 225 (from Table 4) = 21,780 pounds

P₂O₅ = 96.8 x 80 (from Table 4) = 7,744 pounds

K₂O = 96.8 x 215 (from Table 4) = 20,812 pounds

Supplemental nutrient requirements may be determined by subtracting nutrients available in manure (from Step 2) from total nutrients required as follows:

Supplemental N required = 21,780-2,875 = 18,905

Supplemental P₂O₅ required = 7,744-7,744 = 0

Supplemental K₂O required = 20,812-8,250 = 12,562

Solids in Liquid Manure

Management Factors

• Incorporate manure into the soil immediately. Otherwise, apply manure to surface at reasonable distances from streams, ponds, open ditches, neighboring residences and public buildings to minimize runoff and odor problems.
• Minimize odor problems by using common sense, especially during the summer. Spread early in the day when the air is warming up and rising rather than later when the air is cool and settling, and do not spread on days when the wind is blowing toward populated areas or when the air is still. Good management helps avoid neighbor complaints. Analysis from liquid manure varies considerably depending on the amount of dilution. Laboratory analysis is recommended for all animal waste and soil samples are recommended as well. Table 6 shows average nutrients in liquid manure.
• Apply manure to relatively level land -- if slope exceeds 10 percent, knife liquid manure into sod.
• Agitate or mix liquid manure thoroughly in pits to facilitate removal of settled solids and thus insure uniform application of the nutrients.

• Consider irrigating with dilute manures (lagoon or runoff liquids) during dry weather to apply needed water and nutrients to growing crops.
• Wash the plants with clean water to avoid leaf burn when irrigating manure on growing crop.
• Avoid spreading liquid manure on water-saturated or frozen soils where runoff is apt to occur.
• Apply sufficient water sometime during the year to avoid accumulation of salts in the root zone of soils in arid regions.
• Use good safety measures when moving manure from tanks or pits. Because of oxygen deficiency or toxic gas accumulation, avoid entering storage structures when agitating the liquid manure.

The chemical and physical properties of soil, such as water infiltration rate, water-holding capacity, texture and total exchange (nutrient-holding) capacity also affect how much manure can be safely applied to land. Fine-textured soils have low water infiltration rates; therefore, the rate at which liquid manure, especially lagoon effluent, can be applied without runoff may be restricted to the intake rate of the soil. Coarse-textured soils, on the other hand, are quite permeable and can accept higher rates of liquid manure applications without runoff. But because most coarse soils have a very low exchange (nutrient-holding) capacity, you may have to apply smaller amounts of manure during the growing season to minimize the chance of soluble nutrients entering ground water. Organic matter in the manure is decomposed more rapidly in coarse-textured than fine-textured soil and during warm, moist conditions rather than cold, dry conditions. However, fine-textured soils will retain the nutrients longer in the upper profile, where plants can get them.

Published by the University of Georgia in cooperation with the Tennessee Valley Authority in support of AGRI-21 Farming Systems Demonstration Program. TVA and Land Grant University cooperating.

The University of Georgia and Ft. Valley State College, the U.S. Department of Agriculture and counties of the state cooperating. The Cooperative Extension Service offers educational programs, assistance and materials to all people without regard to race, color, national origin, age, sex or disability.

An Equal Opportunity Employer/Affirmative Action Organization Committed to a Diverse Work Force

Gale A. Buchanan, Dean & Director

last updated: 25 February 1997
http://www.bae.uga.edu/extension/pubs/c826-ed.html
[Publications][Bio & Ag Engineering]