The question of whether or not to have your water tested is a serious one. It concerns the health of you and your family. Your water should be safe to drink and acceptable for all other household uses. In addition to illness, a variety of less serious problems such as taste, color, odor and staining of clothes or fixtures are symptoms of water quality problems. Even water that appears problem-free may not necessarily be safe or acceptable.
Not everyone needs to test their water and it is impractical and unnecessary to test for all possible contaminants. This publication provides a few guidelines for deciding whether or not to have your water tested, and if so, what tests would be appropriate for your situation. Your Cooperative Extension Service agent can offer you further assistance and information.
Consumers get their drinking water primarily from two sources: public water supplies and private wells. Public water systems draw water from rivers, reservoirs, springs or groundwater wells and have at least 15 year-round connections or serve more than 25 people. Most private drinking water comes from wells, although springs and ponds are sometimes used.
If your water comes from a public or municipal water system, it is regularly tested for contaminants regulated by federal and state standards, such as microbial pathogens, radioactive elements and organic/inorganic toxic chemicals. In most cases, water testing for health protection is not necessary for a person serviced by a public or municipal system. However, since water tests are conducted at the source, it is possible to have a problem in the municipal delivery line or in the home plumbing system that could contaminate the water.
If your water supply is a private well, you alone are responsible for assuring that it is safe. So set up routine testing for a few of the most common contaminants. Even if you currently have a safe, pure water supply, regular testing can be valuable because it establishes a record of water quality.
The report from the laboratory will indicate that the water is either coliform negative or coliform positive. If the test is coliform positive, then you should act immediately to determine and eliminate the source of contamination and/or disinfect the water before use.
A typical mineral analysis will give the content in parts per million of mineral elements such as calcium, magnesium, manganese, iron, copper and zinc. It will also determine the acidity or pH of the water and the hardness, expressed in parts per million or grains per gallon. It may also give the concentration of nitrate, sulfates and other chemical compounds.
Unless a specific chemical or type of chemical is suspected to be in the water, this type of test is not routinely performed. It can be very expensive to test for the presence of unspecified chemical contaminants. However, if you suspect a particular chemical a test can usually be performed at minimal cost.
If family members or house guests have recurrent incidents of gastrointestinal illness - test for coliform bacteria, nitrate and sulfate.
If household plumbing contains lead pipes, fittings or solder joints - test for pH, corrosion index, lead, copper, cadmium and zinc.
If you are buying a home and wish to assess the safety and quality of the existing water supply - test for coliform bacteria, nitrate, lead, iron, hardness, pH, sulfate, total dissolved solids (TDS), corrosion index and other parameters, depending on proximity to potential sources of contamination.
If a water softener is needed to treat hard water - test for iron and manganese, which decrease the efficiency of cation exchange softeners, before purchase and installation of this type water treatment system. (Cations are calcium, magnesium and other positively charged metal atoms used to soften water.)
If you wish to monitor the efficiency and performance of home water treatment equipment - test for the specific water problem being treated on installation, at regular intervals after installation and if water quality changes.
If water stains plumbing fixtures and laundry - test for iron, manganese and copper.
If water has an objectionable taste or smell - test for hydrogen sulfide, pH, corrosion index, copper, lead, iron, zinc, sodium, chloride and TDS.
If water appears cloudy, frothy or colored - test for color, turbidity and detergents.
If pipes or plumbing show signs of corrosion - test for corrosion index, pH, lead, iron, manganese, copper and zinc.
If water leaves scaly residue and soap scum and the cleaning action of soaps and detergents is decreased - test for hardness.
If water supply equipment (pump, chlorinators, etc.) wears rapidly - test for pH, corrosion index, sand and silt.
Once each year test for coliform bacteria, nitrate, pH and TDS. Test for these contaminants during the spring or summer following a rainy period. Conduct these tests after repairing or replacing an old well or pipe and after installing a new well or pump.
Every three years, test for sulfate, chloride, iron, manganese, lead, hardness and corrosion index.
If a new baby is expected, test for nitrate in
the early months of the pregnancy, before
bringing an infant home and again during the
first six months of the baby's life.
Special Situations. What you are living next to can sometimes affect the quality of your well water. If someone in your family becomes ill, or the taste, odor or color of your water changes, your water supply might be contaminated.
If your well is in an area of intensive agricultural use - test for pesticides commonly used in the area, coliform bacteria, nitrate, pH and TDS.
If your well is near a gas-drilling operation - test for chloride, sodium, barium and strontium.
If your water smells like gasoline or fuel oil and your well is located near an operational or abandoned gas station or buried fuel storage tanks - test for fuel components or volatile organic compounds (VOCs).
If your well is near a dump, junkyard, landfill, factory, or dry-cleaning operation - test for volatile organic compounds (fuel components and cleaning solvents), pH, TDS, chloride, sulfate and metals.
If your well is near sea water and you detect a salty taste or notice signs of corrosion on pipes - test for chloride, TDS and sodium.
Municipal water supply systems regularly test for primary contaminants, monitor levels of sodium and certain unregulated chemical contaminants and look for corrosion in the water distribution system. They will provide water quality reports upon request.
County health departments will usually conduct a bacteriological test.
The University of Georgia Cooperative Extension Service will conduct certain chemical and mineral tests. Contact your local Cooperative Extension agent for information.
Private testing laboratories are listed in the yellow pages of the telephone book; make sure they are certified by your state health department.
Local engineering firms may test water for certain contaminants.
Water treatment companies and plumbing supply stores may offer certain tests in your home for free. However, have a certified testing laboratory verify the test results before purchasing a water treatment system from the company that conducted the free test.
The laboratory will conduct the tests and return a report indicating what, if any, contaminants exceed minimum standards. Many testing laboratories will also recommend the type of water treatment system needed to correct the water quality problem.
Keep a record of all your water test results as a reference for future testing. Even slight changes in contaminant concentrations may be indicators of new water problems you may not detect yourself. By comparing recent test results with original results, you may discover that a change in treatment is needed or that a treatment device is not working as it should.
Laboratory reports may be difficult to understand.
Most companies send a cover letter explaining the
report in nontechnical terms and the actual analysis
sheet. Call the testing laboratory if you need help with
interpretation. Here are items and terms commonly
used in laboratory reports.
MCL is the abbreviation for Maximum
Contaminant Level. This is defined as
acceptable levels as recommended by the U.S.
Environmental Protection Agency.
Detection Level is the level at which the
laboratory's equipment and procedures were
able to produce results within normal
acceptable limits of accuracy.
Level Detected is the amount found in your
water and may be reported in parts per million
(ppm), milligrams per liter (mg/l), parts per
billion (ppb) or other appropriate units.
Hardness is the term applied to water
containing calcium or magnesium salts.
However, the laboratory report usually lists
hardness as equivalent calcium carbonate
(CaCO3). The results will be reported in parts
per million or grains per gallon (one grain per
gallon is equivalent to 17.1 ppm).
Hard water, when heated, develops hard scale
on pipes, cooking utensils and other metal
objects. The life and efficiency of heating
equipment are decreased by the production of
the hard scale on heating coils or elements.
Hard water causes soaps to curd in the water
rather than make a lather. Minimal problems
are usually experienced as long as the
hardness value is less than 100 parts per
million (5.8 grains per gallon).
Dissolved Gases usually are carbon dioxide
(CO2) and hydrogen sulfide (H2S). The
concentration of these gases usually is not
reported. However, objectionable taste and
odor and high acidity may indicate their
presence.
Carbon dioxide results primarily from
decaying organic matter in water-bearing
soils. It accelerates corrosion of iron, brass,
copper and aluminum, causing rust-colored
stains from copper piping. Hydrogen sulfide
comes from a sulfur source, usually
accompanies iron in water, and releases a
rotten-egg odor. Hydrogen sulfide corrodes
iron, brass and copper and causes black
stains. Metallic taste often results from the
corrosion of plumbing.
Acidity - Normally the pH of the water is 6.5
to 8.0. Water with a pH of less than 7
becomes increasingly acidic. Acid water
dissolves metal, shortens the life of plumbing,
discolors water, clogs pipes and develops
stains on fixtures. Water systems of all plastic
piping with glass-lined tanks are less affected
by acidity than metal plumbing.
Iron - The level of iron in the water analysis
report should be less than 0.3 parts per
million (milligrams per liter) for a domestic
well. Iron from a well usually is dissolved
ferrous bicarbonate, which is colorless.
However, exposure to air or heating changes
this compound to ferric hydroxide, which
gives water a red or rusty appearance, stains
fixtures and develops a metallic taste in
water.
Iron also can be accompanied by iron
bacteria. These bacteria multiply in the water
and consume iron while producing a rust-colored slime that coats the interior surfaces
of the plumbing. Total disinfection with
regularly repeated treatment might be
necessary to control the bacteria.
Turbidity (cloudy water) levels should be less
than 5 units to be considered safe. Take
special care to determine the reason for the
turbidity, because this can be a symptom of a
more serious water contamination problem.
Turbidity can be caused by suspended solids
such as mud, algae, iron or other materials.
Increases in turbidity after rainfall can
indicate surface or other introduced pollution.
Color, Palatability or Odor usually result from some of the already mentioned conditions. Correction of any existing conditions most likely improves color, taste and odor.
Water quality problems can be treated in the home with water filters, distillers, softeners, reverse osmosis units and chemical treatment. Before you purchase a system invest time reading about water quality and health "risk" factors. Understand the difference between harmful "contaminants" and the minerals found in our water supply which pose no health risk. Gain a basic knowledge about the functions and limits of each water treatment system.
Being an educated consumer will help you choose a water treatment system for your specific water quality problem and allow you to speak knowledgeably with sales people and water treatment specialists.
For further information, request a copy of Water Quality Problems - Health and Household and Home Water Treatment Systems from your Cooperative Extension Service office.
Brodie, Herbert L. Testing for Water Quality. Water
Resources 15; University of Maryland
Cooperative Extension Service.
Graham, G. Testing for Water Quality. Mississippi
State University Cooperative Extension
Service. August, 1990.
Home Water Testing, Water Quality Fact Sheet 4;
USDA Extension Service, cooperating with
Cornell University and the University of
Maryland. 1989.
Tyson, A. and Harrison, K., Water Quality For
Private Water Systems. Georgia Cooperative
Extension Service, University of Georgia,
Athens, GA. 1989.
Water Testing...Option or Necessity? Water Quality
Research Council Water Review, Vol. 5,
No.2. 1990.
Partial funding for this publication was provided by
the Georgia Department of Agriculture and the U.S.
Environmental Protection Agency.
The University of Georgia and Ft. Valley State College, the U.S. Department of Agriculture and counties of the state cooperating. The Cooperative Extension Service offers educational programs, assistance and materials to all people without regard to race, color, national origin, age, sex or disability.
An Equal Opportunity Employer/Affirmative Action Organization
Committed to a Diverse Work Force
Circular 819-9 February 1992
Gale A. Buchanan, Dean and Director